PNB-Builder Gel Crystal Clear

Transparent one-phase gel for modeling nails with high self-leveling properties and medium viscosity. It has good adhesive qualities. It can be used for both modeling and as a substrate for colored and camouflage gels, as well as for layered patterns and painting, suitable for aquarium design. No peeling and no yellowing.

Curing time: 2 minutes in UV lamp, 60 seconds in LED lamp.

Instructions for Applying PNB Universal Gels:

1. Degrease the nail surface with Nail Prep. Remove the cuticle and buff the shine off the nail plate with a 180/240 grit nail file. Remove dust.
2. Apply a nail dehydrator.
3. Apply Acid Primer or Bond Control acid-free primer, depending on the condition of the nail plate. Acid Primer is used when the nail plate is very humid, and the acid-free primer is suitable for a normal nail plate. Acid Primer should be applied with a semi-dry brush in small amounts, avoiding contact with the skin. The product will evaporate from the plate on its own.
4. As a base, use the UV/LED Builder Crystal Clear/Crystal Pink gel of your choice. It is applied in a thin layer with rubbing motions. Cure in a lamp for 30 to 60 seconds.
5. Place the form alternately on each finger and spread a thin substrate to the desired length and shape, shaping the architecture of the nails with a gel of the chosen shade. To create an arch, you can put the gel in the lamp for 7 to 12 seconds, depending on the lamp. Then send it to the lamp for complete polymerization for 60 seconds.
6. Remove the residual sticky layer with Gel Cleanser.
7. Perform step-by-step filing with a 180/240 grit file.
8. Apply UV/LED Quick Top for shine and protection against chipping and scratches, curing for 60 seconds. *If the nail plate is thin and humid, Bio Base can be used as a base coat. It should be applied in a very thin layer, with rubbing motions on the previously prepared nail, curing in the lamp for 30 seconds.

15 ml, 50 ml.